System and Hardware Requirements for SpeedPilot MKVI
System requirements (PC):
Operating System requirements: Windows98 or newer
Hardware requirements: 3MB free hard drive space, 8K or more RAM (See special note below for notebook and tablet PC's)
Download size: 1.84MB
Download format: .ZIP compressed file (A free trial file decompression program can be downloaded
here: http://www.winzip.com/downwz.htm)
Download Instructions
Download the installation file using the link below. Save the file to your desktop. After
downloading, unZIP the file contents by right-clicking the folder and selecting Extract All (or use
the winzip program). Start the installation program by double-clicking on the Setup.exe file. A
standard Windows installation will begin. During the installation Windows may notify you that an
attempt is being made to install a file that is either newer or older than a file that is already
installed. It will give you the choice of either installing the new file or keeping the existing file. We
recommend keeping the existing file.
It is possible to uninstall SpeedPilot MKVI using the add/remove program function in the Windows
control panel.
To begin downloading SpeedPilot MKVI for PC click HERE
Special Note for Notebook and Tablet PC Use
The SpeedPilot MKVI uses the microprocessor clock to keep time. On some small devices (like small notebook PC's and tablet PC's), the microprocessor clock is slowed down when low demand tasks are running. When this happens, it also slows down the SpeedPilot MKVI clock. In order for the SpeedPilot MKVI to keep time accurately, the system on these devices must be configured to maintain maximum clock speed at all times. How and where this configuration is done depends on the device, but can usually be found in a power management setting for the system (consult the documentation for your device). To facilitate this adjustment (if required) we provide a clock program to monitor the accuracy of your clock. This program displays three different system time choices.
Once you have adjusted your system, you can use this program to verify that the clock is accurate. If only one or two of the clock choices is accurate, you can email us with that information, and we can configure your software to use the most accurate choice. You can download a copy of the clock tester application HERE
System Requirements (PDA and Mobile Phone):
Operating System requirements: PALM OS v.5.2 or newer
PDA hardware requirements: PALM T3, PALM T5, PALM TX and PALM LifeDrive PDA's ONLY!
Mobile Phone hardware requirements: TREO 755, 700 or 680 phones ONLY!
Download size: 0.69MB (PDA), 0.70MB (Mobile Phone)
Download format: .ZIP compressed file (A free trial file decompression program can be downloaded
here: http://www.winzip.com/downwz.htm)
Download Instructions
Download the installation file using the link below. Save the file to your desktop. After
downloading, unZIP the file contents by right-clicking the folder and selecting Extract All (or use
the winzip program). Install the .PRC and .PDB files on your PDA or mobile phone using the Palm
Quick Install software.
It is possible to uninstall SpeedPilot MKVI and TwinMaster Digital using the APP/DELETE function.
To begin downloading SpeedPilot MKVI with stylus input for PDA click HERE
To begin downloading SpeedPilot MKVI with five way navigation input for PDA click HERE
To begin downloading TwinMaster Digital with stylus input for Mobile Phones click HERE
Special note for the Palm T3
If the button that switches your Palm T3 between portrait and landscape modes does not work
when you are running the demo you will need to install two additional files that Palm has produced.
They are sometimes needed for third party programs like SpeedPilot MKVI
that require high screen resolution in landscape mode. They are called the "T3 DIA Compatibility
PRC's". Do not install these PRC files onto any device other than a Palm Tungsten T3 under any
circumstances. These files are for the T3 ONLY. You must install both PRC's at the same time.
Installing them separately may force a hard reset of the PDA. You can download a copy of these
PRC's HERE
System requirements (PC):
Operating System requirements: Windows98 or newer
Hardware requirements: 3MB free hard drive space, 8K or more RAM (See special note below for notebook and tablet PC's)
Download size: 1.84MB
Download format: .ZIP compressed file (A free trial file decompression program can be downloaded
here: http://www.winzip.com/downwz.htm)
Download Instructions
Download the installation file using the link below. Save the file to your desktop. After
downloading, unZIP the file contents by right-clicking the folder and selecting Extract All (or use
the winzip program). Start the installation program by double-clicking on the Setup.exe file. A
standard Windows installation will begin. During the installation Windows may notify you that an
attempt is being made to install a file that is either newer or older than a file that is already
installed. It will give you the choice of either installing the new file or keeping the existing file. We
recommend keeping the existing file.
It is possible to uninstall SpeedPilot MKVI using the add/remove program function in the Windows
control panel.
To begin downloading SpeedPilot MKVI for PC click HERE
Special Note for Notebook and Tablet PC Use
The SpeedPilot MKVI uses the microprocessor clock to keep time. On some small devices (like small notebook PC's and tablet PC's), the microprocessor clock is slowed down when low demand tasks are running. When this happens, it also slows down the SpeedPilot MKVI clock. In order for the SpeedPilot MKVI to keep time accurately, the system on these devices must be configured to maintain maximum clock speed at all times. How and where this configuration is done depends on the device, but can usually be found in a power management setting for the system (consult the documentation for your device). To facilitate this adjustment (if required) we provide a clock program to monitor the accuracy of your clock. This program displays three different system time choices.
Once you have adjusted your system, you can use this program to verify that the clock is accurate. If only one or two of the clock choices is accurate, you can email us with that information, and we can configure your software to use the most accurate choice. You can download a copy of the clock tester application HERE
System Requirements (PDA and Mobile Phone):
Operating System requirements: PALM OS v.5.2 or newer
PDA hardware requirements: PALM T3, PALM T5, PALM TX and PALM LifeDrive PDA's ONLY!
Mobile Phone hardware requirements: TREO 755, 700 or 680 phones ONLY!
Download size: 0.69MB (PDA), 0.70MB (Mobile Phone)
Download format: .ZIP compressed file (A free trial file decompression program can be downloaded
here: http://www.winzip.com/downwz.htm)
Download Instructions
Download the installation file using the link below. Save the file to your desktop. After
downloading, unZIP the file contents by right-clicking the folder and selecting Extract All (or use
the winzip program). Install the .PRC and .PDB files on your PDA or mobile phone using the Palm
Quick Install software.
It is possible to uninstall SpeedPilot MKVI and TwinMaster Digital using the APP/DELETE function.
To begin downloading SpeedPilot MKVI with stylus input for PDA click HERE
To begin downloading SpeedPilot MKVI with five way navigation input for PDA click HERE
To begin downloading TwinMaster Digital with stylus input for Mobile Phones click HERE
Special note for the Palm T3
If the button that switches your Palm T3 between portrait and landscape modes does not work
when you are running the demo you will need to install two additional files that Palm has produced.
They are sometimes needed for third party programs like SpeedPilot MKVI
that require high screen resolution in landscape mode. They are called the "T3 DIA Compatibility
PRC's". Do not install these PRC files onto any device other than a Palm Tungsten T3 under any
circumstances. These files are for the T3 ONLY. You must install both PRC's at the same time.
Installing them separately may force a hard reset of the PDA. You can download a copy of these
PRC's HERE
 |
 |
 |
 |
 |
 |
 |
 |
